Glossary Updates12 new terms added to the glossaries · October 2, 2026, 22:44 CEST
AI TechDocKnowledge

Glossary · Safety standards

ISO 10218-1

German: ISO 10218-1

ISO 10218-1 is the international standard that specifies safety requirements for industrial robots as delivered by the robot manufacturer, covering design, protective measures, safety functions and information for use.

  • Standards

In one sentence

ISO 10218-1 specifies safety requirements for the design of industrial robots as supplied by the robot manufacturer.

Example

A robot manufacturer designs the robot's speed and position monitoring and its teach pendant enabling device according to ISO 10218-1.

How it applies

  • Engineering: Part 1 addresses the robot manufacturer; the integration of the robot into a cell or application is covered by ISO 10218-2. The standard was revised in 2025.
  • Compliance: EN ISO 10218-1 is used as a harmonized standard for robots under EU machinery legislation; check the currently cited edition. A robot alone is partly completed machinery in most cases.
  • Documentation: The robot manufacturer's information for use (safety functions, stopping distances and times, integration requirements) is a key input for the integrator; the documentation team should make it easy to find and cite.

ISO 10218-1 vs. ISO 10218-2

Part 1: the robot. Part 2: the robot application and cell, including safeguarding and collaborative applications.

By knowledge.aitechdoc.world · Published September 26, 2026 · Last reviewed

Source: ISO 10218-1, Robotics — Safety requirements — Part 1: Industrial robots

Definitions follow the cited standards and specifications. Where a source is a copyrighted publication, such as an ISO, IEC or EN standard, the definition is a close paraphrase, not a verbatim quotation, so as not to infringe copyright. We recommend reading the original publication. The sections “How it applies” are editorial commentary by AI TechDoc Knowledge and are not part of any standard.

Seen a mistake? Send us a note!